您的位置: 首页 > 国外标准 > 美国材料与试验协会ASTM >  ASTM B565-2004(2010)  铝和铝合金铆钉及冷镦头丝与棒材的剪切试验的标准试验方法
 

ASTM B565-2004(2010)  铝和铝合金铆钉及冷镦头丝与棒材的剪切试验的标准试验方法

标准编号:ASTM B565-2004(2010)
分享到:

中文标准名称:铝和铝合金铆钉及冷镦头丝与棒材的剪切试验的标准试验方法
英文标准名称:Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
标准状态:Superseded
复审确认日期:2010
代替标准号:ASTM B565-04
语言:英文版,中文版
发布日期:2004
标准类别:美国材料与试验协会ASTM
中国标准文献分类法(中标分类CCS):冶金 >> 金属理化性能试验方法 >> 金属工艺性能试验方法
中国标准文献分类法(中标分类CCS):冶金 >> 有色金属产品 >> 铜产品
标准页数:3P.;A4
标准简介:

This test method is intended solely for the shear testing of rivets and cold-heading wire and rod, and is not generally recommended for the determination of the shear strength of other products. For rivets, this method is limited to rivets having a shank length equal to or greater than 2d.

Note 28212;The results of shear tests of specimens machined from products other than wire, rod, and rivets may be greatly dependent upon the orientation of the specimen within the original test material, and the direction in which the force is applied relative to the grain flow in the specimen. It is recommended that shear strengths of other products be determined by Test Method B769 for products greater than 0.250 in. (6.4 mm) and Test Method B831 for products less than 0.250 in. (6.4 mm). Shear strengths developed by this test method have been shown to vary from those developed by other methods. If Test Method B565 is used for shear testing of other products, variables such as those described in Test Method B769 should be identified and controlled.

The results of shear tests are dependent upon the relative and absolute lengths of specimen which are sheared out, and those which are supported. The results of tests made in accordance with this method should not be directly compared with those determined in other types of tests in which the methods of loading and supporting the specimen are different.

1.1 This test method covers the double shear testing of aluminum and aluminum alloy rivets with round, solid shanks and cold-heading wire and rod.

Note 18212;Exceptions to this test method may be necessary in individual specifications or methods for tests for a particular material.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

文件格式:纸质版或者PDF电子版(用Acrobat Reader打开)或Word版本doc格式
PDF格式 ASTM B565-2004(2010) 铝和铝合金铆钉及冷镦头丝与棒材的剪切试验的标准试验方法 免费下载 Word格式 ASTM B565-2004(2010) 铝和铝合金铆钉及冷镦头丝与棒材的剪切试验的标准试验方法 免费下载免费标准下载
文件大小:866 KB
添加时间:2013/10/16
 
相关免费标准
 
 
本类标准下载排行
 
 
本类最新免费标准
 
免费标准下载网 |标准分享网 |联系我们
版权所有:www.ZBGB.org